Esta página también está disponible en español.Ver en español →

How to calculate linen par levels for a hotel

A step-by-step method for sheets, pillowcases and towels, with a worked example for an 80-room property and guidance on par 3 vs par 4 or 5.

A hotel linen par level is the number of complete sets of linen you own for every bed (sheets and pillowcases) or every room (towels and bath mats). Most properties run between par 3 and par 5: par 3 if you launder on site with a fast turnaround, par 4 to 5 if you send linen to an outside laundry or run high occupancy. To calculate it, count the pieces in one set, multiply by your beds or rooms, then multiply by your par.

Below is the full method, a worked example for an 80-room property, and the practical details that decide whether par 3 is enough or you need more.

What "par" actually means

One par is one full set of linen for every bed or room at full occupancy. If a king bed uses one fitted sheet, one flat sheet and four pillowcases, one par for that bed is those six pieces. Par 3 means you own three of those sets per bed.

Each par has a job in the linen cycle:

  • Par 1: on the bed or in the bathroom.
  • Par 2: in the laundry being washed, dried and folded.
  • Par 3: clean, on the shelf or on the housekeeping cart, ready for the next turn.
  • Par 4 and 5: buffer for slow laundry turnaround, outsourced pickup schedules, peak weekends, stains and rejects, and new stock held in reserve for replacement.

Rule of thumb: par 3 is the working minimum. Below it, housekeepers start waiting on the laundry, rooms are released late, and linen is pushed back into service before it has rested or been inspected.

Par 3 vs par 4 vs par 5: which do you need?

ParBest fitTrade-off
Par 3On-premise laundry (OPL) with same-day turnaround, steady occupancy, reliable equipmentLowest investment, but little margin for breakdowns, sold-out weekends or stained pieces
Par 4Most full-service and midscale hotels; OPL at high occupancy; outsourced laundry with daily pickupComfortable cushion; linen rests between uses, which can help it last longer
Par 5Outsourced laundry with pickup every other day or less, resorts with large seasonal swings, remote locationsHighest upfront cost and storage space; risk of dead stock if occupancy drops

A useful way to think about it: add one par for every full day your linen spends away from the property beyond the normal same-day cycle. If your outside laundry picks up Monday and returns Wednesday, you need more linen in circulation than a hotel that washes in the basement and folds by 3 p.m.

How to calculate par levels, step by step

  1. Count beds by size, not just rooms. A double-queen room needs two sets of queen sheets. List king, queen, double and twin beds separately, plus rollaways and sofa beds.
  2. Define one set per bed. Decide how many sheets go on each bed (fitted plus flat, two flats, or triple-sheeting with a third flat sheet over the blanket) and how many pillows each bed carries.
  3. Define one set per room for bath linen. Base towels on the maximum occupancy of the room. A common standard is one bath towel, one hand towel and one washcloth per guest, plus one bath mat per bathroom.
  4. Multiply by beds or rooms to get one par for the whole property.
  5. Multiply by your par (3, 4 or 5).
  6. Convert to dozens and round up, since most hotel linens are sold and packed by the dozen.

Worked example: an 80-room hotel

Assume a property with 80 rooms:

  • 50 king rooms (one king bed, sleeps 2)
  • 30 double-queen rooms (two queen beds, sleeps 4)
  • Each bed uses one fitted sheet and one flat sheet
  • King beds carry 4 pillows; queen beds carry 2 pillows
  • Towels: 1 bath, 1 hand and 1 washcloth per guest at maximum occupancy, plus 1 bath mat per room

Step 1: one par for the property

ItemCalculation1 par
King fitted sheets50 king beds x 150
King flat sheets50 king beds x 150
Queen fitted sheets30 rooms x 2 beds x 160
Queen flat sheets30 rooms x 2 beds x 160
King pillowcases50 beds x 4200
Standard/queen pillowcases60 beds x 2120
Bath towels(50 rooms x 2 guests) + (30 rooms x 4 guests)220
Hand towelssame as bath towels220
Washclothssame as bath towels220
Bath mats80 rooms x 180

Step 2: multiply by par and convert to dozens

ItemPar 3 (pieces)Par 3 (dozens)Par 4 (pieces)Par 4 (dozens)
King fitted sheets1501320017
King flat sheets1501320017
Queen fitted sheets1801524020
Queen flat sheets1801524020
King pillowcases6005080067
Standard/queen pillowcases3603048040
Bath towels6605588074
Hand towels6605588074
Washcloths6605588074
Bath mats2402032027

Dozens are rounded up. Going from par 3 to par 4 adds exactly one third more linen, so it is easy to model the cost difference once you have a per-dozen price for each item.

Adjust the assumptions to your property

  • Two flat sheets instead of fitted: many hotels skip fitted sheets so every sheet is interchangeable and folds flat. Replace the fitted line with a second flat line.
  • Triple-sheeting: add a third flat sheet per bed if you sheet over the blanket instead of using a duvet cover.
  • Duvet covers, mattress pads and blankets: these are usually changed less often, so many properties carry them at a lower par (often 2 to 3) than sheets.
  • Pool and spa towels: calculate separately, based on peak daily use rather than rooms.
  • Rollaways and cribs: add a few sets so they never borrow from guest-room stock.

On-premise vs outsourced laundry

Your laundry setup is the single biggest factor in choosing a par.

On-premise laundry (OPL)

If soiled linen comes off the bed in the morning and is clean and folded by the afternoon, par 3 can work. Plan for par 3.5 to 4 if your washers and dryers are near capacity at full occupancy, if you have only one dryer (a single breakdown stops everything), or if you run long weekend peaks.

Outsourced laundry

When linen leaves the building, count the days it is gone. Linen picked up today and delivered back tomorrow spends a full day in transit and processing, so par 4 is a sensible starting point. Pickup every other day, holiday closures or a laundry that returns short counts push you toward par 5. Ask your laundry for their average turnaround and their reject rate, and build both into your par.

Rule of thumb: par 3 for same-day OPL, par 4 for next-day outsourced service, par 5 when linen is off property for two days or more.

Storage: where all that linen lives

Par 4 for the example hotel is more than 4,000 pieces. Before ordering, confirm you have room for it.

  • Keep clean linen on closed or covered shelving, off the floor, away from chemicals and the soiled-linen area.
  • Store by item and size with clear shelf labels, so king and queen sheets are never mixed up on a busy morning.
  • Rotate stock first in, first out. New linen should go to the back of the shelf so older pieces are used first and wear evenly.
  • Keep floor-closet stock to what one shift needs. Extra linen in floor closets tends to disappear or get used as rags.
  • Hold reserve stock (the last half par or so) in a locked linen room and release it only to replace rejects.

When to reorder

Linen leaves your inventory every day through wear, stains, guest theft and misuse. A par level only works if you count and top it up on a schedule.

  1. Count monthly or quarterly. Count everything at the same time: shelves, carts, floor closets, the laundry and in rooms. Divide the total of each item by one par to see your actual par.
  2. Set a reorder point. Many properties reorder when an item drops about half a par below target, for example to 2.5 when the target is par 3. Factor in supplier lead time so stock arrives before you hit the floor.
  3. Track losses by item. If washcloths disappear twice as fast as bath towels, order to the item, not the set.
  4. Order before peak season, not during it.

For how fast linen wears out and how to budget annual replacement, see when to replace hotel sheets and towels. Towel weight also affects laundry capacity and turnaround; our towel weight and GSM guide explains how.

If you work with a supplier that stocks close to your property, you can carry a slightly leaner reserve because replacements arrive in days. CATELS, for example, delivers from warehouses in San Diego and Tijuana in 24 to 72 hours across California and Baja California, which lets many hotels and motels reorder smaller quantities more often instead of tying up cash in a back room full of linen.

Par level checklist

  • Beds counted by size, including rollaways and sofa beds
  • One set defined per bed (sheets, pillowcases) and per room (towels, bath mat)
  • Towels based on maximum room occupancy
  • Par chosen based on laundry turnaround (3, 4 or 5)
  • Quantities converted to dozens and rounded up
  • Storage space confirmed for the full par
  • Count schedule and reorder point set for each item
  • Pool, spa and specialty linen calculated separately

Frequently asked questions

What is par 3 in hotel linen?

Par 3 means you own three complete sets of linen for every bed or room: one in use, one in the laundry and one clean on the shelf. It is the usual minimum for a hotel with same-day on-premise laundry.

How many towels does a hotel need per room?

A common standard is one bath towel, one hand towel and one washcloth per guest at maximum occupancy, plus one bath mat per bathroom, multiplied by your par. A double-queen room that sleeps four at par 3 needs 12 of each towel and 3 bath mats.

Should a hotel with outsourced laundry use a higher par?

Usually yes. Linen sent to an outside laundry is away from the property for at least a day, so par 4 is a sensible starting point, and par 5 if pickup is every other day or less often.

How often should hotels count linen inventory?

Most properties count monthly or quarterly, counting all locations at the same time. Comparing the count to your target par shows what to reorder and how quickly each item is being lost.